How to Unzip Tempurpedic Mattress

How to Unzip a Tempurpedic Mattress Cover (The Right Way)

Unzipping a Tempurpedic mattress cover might seem straightforward, but doing it correctly is crucial to maintain the integrity of your high-quality mattress. Here's a step-by-step guide to help you master this task.

Key Takeaways

  • Preparation is Key: Clear the bed of all objects before starting to ensure easy access to the zipper.
  • Locate the Zipper: Find the zipper, usually along the sides or bottom edge, possibly under a protective flap.
  • Unzip Gently: Pull the zipper slowly and carefully to avoid damage.
  • Handle Zipper Snags with Care: If the zipper gets stuck, gently remove any fabric obstructions.
  • Remove Cover Properly: Peel the cover off from the top down, avoiding strain on the mattress foam.
  • Post-removal Care: Machine wash or spot clean the cover depending on the care label instructions.
  • Re-Zipping Tips: Align the cover, ensure no fabric is caught, and zip gently.
  • Know Your Cover Type: Different covers (standard, cooling, hypoallergenic) require specific care.
  • Regular Maintenance: Regular cleaning extends cover life and helps with allergy prevention.
  • Troubleshoot Common Issues: Address stuck zippers and shrinkage following specific tips.
  • Seek Professional Care When Needed: For deep cleans or warranty claims, professional services are recommended.
  • Customer Support: Contact Tempurpedic’s customer service for any specific queries or concerns.

Step 1: Preparation

Before you begin, ensure your bed is clear of any objects like pillows, sheets, or comforters. This makes it easier to access the zipper and prevents any unnecessary strain on the mattress cover.

Step 2: Locating the Zipper

Tempurpedic mattress covers typically have their zippers located along one of the mattress sides, often at the bottom edge. Carefully inspect the sides to locate the zipper. It may be under a protective flap or slightly hidden to maintain the mattress's sleek look.

Step 3: Unzipping with Care

Once you've located the zipper, gently pull it across the mattress. It's important to do this slowly to prevent any damage to the zipper or the fabric. If you encounter any resistance, do not force it. Instead, backtrack a little and try again.

Step 4: Addressing Zipper Snags

If the zipper gets stuck, check for any fabric caught in its path. Gently remove any obstruction and proceed. Using force can damage both the zipper and the fabric, leading to costly repairs.

Step 5: Removing the Cover

After unzipping, carefully peel the cover away from the mattress. Start from the top, slowly working your way down to ensure the foam isn't strained or torn.

Step 6: What to Do After Removal

Once removed, you can wash the cover if it's machine washable (check the care label). If it's not, spot cleaning is recommended using a mild detergent and water.

Tips for Re-Zipping

  • Align the cover correctly before zipping it back.
  • Ensure no fabric is caught in the zipper.
  • Zip slowly and gently.

Unzipping a Tempurpedic mattress cover properly can extend its life and maintain your mattress's quality. Remember, patience and gentle handling are key.

For more detailed information or specific queries, it's always best to refer to the care instructions provided by Tempurpedic or contact their customer service for guidance.

Understanding Different Types of Tempurpedic Covers

Tempurpedic offers a variety of mattress covers, each designed for specific needs:

  • Standard Covers: These are the most common and are designed to fit snugly over your Tempurpedic mattress. They're typically made of a soft, breathable fabric that's easy to handle and maintain.
  • Cooling Covers: Designed for those who sleep hot, these covers contain cooling technologies to help regulate temperature throughout the night.
  • Hypoallergenic Covers: Ideal for allergy sufferers, these covers are designed to prevent allergens from penetrating the mattress.

Knowing your cover type is crucial, as care instructions may vary.

The Importance of Regular Maintenance

Regular maintenance of your mattress cover is key for several reasons:

  • Longevity: Regular cleaning and careful handling can significantly extend the life of your mattress cover.
  • Allergy Prevention: For those with allergies, keeping the cover clean is essential to prevent the accumulation of allergens like dust mites.
  • Spotting Wear and Tear: Regular checks can help you spot any issues early on, allowing for timely repairs or replacements.

Troubleshooting Common Issues

Here are solutions to some common mattress cover issues:

  • Stuck Zipper: Gently wiggle the zipper back and forth to free it. Avoid forceful tugs.
  • Shrinkage After Washing: Always follow the care label instructions to prevent shrinkage. If it's already shrunk, gently stretching the fabric when damp might help.
  • Realigning the Cover: Start by aligning the corners and edges, then smooth out the cover before zipping it up.

Professional Care and Services

Sometimes, professional help is the best option:

  • Professional Cleaning: For deep cleans or stubborn stains, consider professional cleaning services.
  • Warranty Claims: If your cover has a defect, check if it's under warranty. Tempurpedic customer service can guide you through the process.
  • Customer Support: For any doubts or specific concerns, Tempurpedic’s customer support can provide tailored advice and solutions.

In summary, knowing how to care for your Tempurpedic mattress cover, understanding when to seek professional help, and troubleshooting common issues can significantly enhance the longevity and comfort of your mattress.


How do I prepare my bed before unzipping the mattress cover?

Ensure your bed is free of objects like pillows, sheets, or comforters. This step is essential for easy access to the zipper and to prevent strain on the cover.

Where is the zipper located on Tempurpedic mattress covers?

Typically, the zipper is located along one of the sides of the mattress, often at the bottom edge. It may be under a protective flap or slightly hidden for aesthetic reasons.

What is the correct way to unzip the mattress cover?

Gently pull the zipper across the mattress, moving slowly to avoid damaging the zipper or fabric. If you meet resistance, don’t force it; instead, gently backtrack and try again.

What should I do if the zipper gets stuck?

If the zipper is stuck, carefully check for and remove any fabric caught in its path. Forceful pulling can damage both the zipper and the cover.

How should I remove the cover after unzipping it?

Start peeling the cover away from the top, gradually moving downwards. This method helps avoid putting strain on the mattress foam.

Can I machine wash the Tempurpedic mattress cover?

This depends on the specific care instructions for your cover. Check the label; if machine washable, follow the recommended settings. Otherwise, spot cleaning with a mild detergent is advised.

What are some tips for re-zipping the mattress cover?

Make sure to align the cover correctly, ensure no fabric is caught in the zipper, and zip it back up slowly and gently.

Are there different types of Tempurpedic mattress covers?

Yes, Tempurpedic offers various covers like standard, cooling, and hypoallergenic options, each requiring specific care.

Why is regular maintenance of the mattress cover important?

Regular cleaning and maintenance extend the cover's life, prevent allergen accumulation, and help you spot early signs of wear and tear.

What should I do for a mattress cover that has shrunk after washing?

If shrinkage occurs, try gently stretching the fabric while it's damp. Always follow the care label instructions to prevent future shrinkage.

When should I seek professional care for my mattress cover?

Consider professional cleaning for deep cleans or stubborn stains. If there's a defect and the cover is still under warranty, professional services might be needed.

Who should I contact for specific concerns about my Tempurpedic mattress cover?

Tempurpedic’s customer support is the best contact for tailored advice, solutions, or warranty-related queries.